Skip to main content

Canon 3U5MGXSBA Evaluation Kit

Canon 3U5MGXSBA Evaluation Kit

Contact Critical Link for product availability

Overview

The Canon 3U5MGXSBA Evaluation kit features a 3U5MGXSBA or LI5020 5MP industrial CMOS image sensor with fast, distortion free image capture from Canon. The sensor features an electronic shutter and all pixel progressive readout of 120 fps.  In a 2/3″ format, proprietary pixel designs with low power consumption and enhanced sensitivity further improve performance. The 3U5MGXSBA and LI5020 CMOS sensors are innovative solutions where high performance is required in a small format. The camera is available with an AIA USB 3.0 Vision Interface (U3V), and a video output interface.

Combined with Critical Link’s software tools designed for our Arria 10 based processor card, the Canon 3U5MGXSBA Evaluation Kit makes sensor evaluation and product integration quick and easy. Critical Link also supports a board set version of the camera for customers designing their own mechanicals or managing other integrations; contact us for more details.

Evaluation Kit Contents

The Canon 3U5MGXSBA Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to accelerate development time. The Evaluation Kit features a camera with a pre-installed 3U5MGXSBA or LI5020 5 MP global shutter CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA*.

The 3U5MGXSBA Evaluation Kit includes:

  • Evaluation camera with pre-installed sensor (mono, RGB, or RGB-NIR )
  • Accessory package for out-of-the-box operation (quick start guide, power supply, all necessary cables)
  • Embedded software to setup the sensor, acquire image data, and communicate over USB 3.1 interface with any USB 3 compliant UI
  • PC-based UI application available for download to communicate with the camera
  • Sensor board design files source code*
  • VHDL code for the FPGA*

*Source code and VHDL code only available upon request with an NDA

NOTE: A Lens is not included in this kit.

As the lens plays a critical role in any imaging system, it is imperative that a suitable lens is selected to properly evaluate sensor performance for your end application.

When selecting an appropriate lens, there are several key factors which must be considered: Lens Type, Lens Mount, Focal Length, Sensor Size, Resolving Power, and Aperture to name a few of the more important ones. Some of these factors are associated with your application, and some are directly tied to how the CMOS sensor will perform. Please read below to learn more.

Applications

  • Machine Vision
  • Industrial Inspection
  • Flat Panel Display Inspection
  • Transportation
  • Document Scanning
  • Aerial Mapping and Surveillance
  • Video/Broadcast
  • 3D metrology
  • Aeronautic imaging
  • Digital archives
  • Document scanning
  • Intelligent traffic systems
  • Large area surveillance
  • Mapping
  • Medical imaging
  • Packaging and inspection
  •  Reconnaissance
  • Scientific research
  • Security

Documentation

Specifications

Sensor Specification

Sensor Canon 3U5MGXSBA Canon LI5020
Active Pixels 2592 (H) x 2056 (V) 2592 (H) x 2056 (V)
Pixel Size 3.4µm x 3.4µm 3.4µm x 3.4µm
Image Area
8.8mm (W) x 7.0mm (H)
8.8mm (W) x 7.0mm (H)
Frame Rate (Global Shutter)
120fps, 12-bit output mode
120fps, 12-bit output mode
Dark Current @ 60C
1.3 e-/s @gain x1
TBA
Chroma
Mono, Color or RGB-NIR Pixel Filter
Mono, Color or RGB-NIR

System Noise

Read-out Noise (@120fps)
2.6 e¯

Data Acquisition Modes

Global shutter
Charge storage period control feature

On-board Processor (MitySOM-A10S)

CPU Engine
Intel/Altera Arria 10 SoC – Dual core ARM and up to 480KLE FPGA fabric
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard F mount lens, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
-30°C to +105°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

Quantum Efficiency

3U5MGXSBA Sensor QE data:

3U5MGXS Quantum Efficiency

 

LI5020 Sensor QE data:

 

 

 

 

Block Diagram

Interfaces

Mechanical

  • Measurements are in millimeters
Dimensions (with Compact Enclosure)
119.3mm x 119.3mm x 69.7mm  (4.7″ x 4.7″ x 2.74″)
Weight (with Compact Enclosure)
1190g (42oz)

Software

MityCAM image acquisition can be done with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists off-the-shelf configuration options for the 3U5MGXSBA Evaluation Kit. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

 Kit Part Number 
Interface Option
Sensor Option
Buy
3U5MGXS-UM-C-S USB 3 + Video output Mono Buy
3U5MGXS-UC-C-S USB 3 + Video output Color Buy
3U5MGXS-UI-C-S USB 3 + Video output RGB-NIR Buy
LI5020-UM-C-S USB 3 + Video output Mono Buy
LI5020-UC-C-S USB 3 + Video output Color Buy
LI5020-UI-C-S USB 3 + Video output RGB-NIR Buy

 

Canon 120MXS Evaluation Kit

Canon 120MXS Evaluation Kit

Contact Critical Link for product availability

Overview

The Canon 120MXS Evaluation Kit features an ultra-high 120 MP industrial CMOS image sensor from Canon. The sensor shares a Floating Diffusion Node between four pixels instead of one, allowing for smaller readout circuitry and larger photodiodes which allows for increased sensitivity. Small 2.2µm pixels leverage a wire layer to prevent crosstalk, contributing to superior image quality, while progressive pixel reading of 28 digital output channels deftly handles the enormous amount of data from 122 million effective pixels. The camera is available with an AIA USB 3.0 Vision Interface (U3V), and a video output interface.

Combined with Critical Link’s software tools designed for our Arria 10 based processor card, the Canon 120MXS Evaluation Kit makes sensor evaluation and product integration quick and easy. Critical Link also supports a board set version of the camera for customers designing their own mechanicals or managing other integrations; contact us for more details.

Evaluation Kit Contents

The Canon 120MXS Evaluation Kit allows integrators and end users to assess sensor performance and provides assets for image system designers to help accelerate development time. The Evaluation Kit features a camera with a pre-installed 120MXS 120 MP CMOS sensor with raw data serial output via a USB 3.1 (Gen 1) interface. The evaluation kit has an open architecture design and gives developers the option to embed processing and software with the on-board ARM and FPGA*.

The 120MXS Evaluation Kit includes:

  • Evaluation camera with pre-installed sensor (mono, RGB, or RGB-NIR )
  • Accessory package for out-of-the-box operation (quick start guide, power supply, all necessary cables)
  • Embedded software to setup the sensor, acquire image data, and communicate over USB 3.1 interface with any USB 3 compliant UI
  • PC-based UI application available for download to communicate with the camera
  • Sensor board design files source code*
  • VHDL code for the FPGA*

*Source code and VHDL code only available upon request with an NDA

NOTE: A Lens is not included in this kit.

As the lens plays a critical role in any imaging system, it is imperative that a suitable lens is selected to properly evaluate sensor performance for your end application.

When selecting an appropriate lens, there are several key factors which must be considered: Lens Type, Lens Mount, Focal Length, Sensor Size, Resolving Power, and Aperture to name a few of the more important ones. Some of these factors are associated with your application, and some are directly tied to how the CMOS sensor will perform.

Applications

  • Machine Vision
  • Industrial Inspection
  • Flat Panel Display Inspection
  • Transportation
  • Document Scanning
  • Aerial Mapping and Surveillance
  • Video/Broadcast
  • 3D metrology
  • Aeronautic imaging
  • Digital archives
  • Document scanning
  • Intelligent traffic systems
  • Large area surveillance
  • Mapping
  • Medical imaging
  • Packaging and inspection
  •  Reconnaissance
  • Scientific research
  • Security

Documentation

Specifications

Sensor Specification

Sensor Canon 120MXS
Active Pixels 13272 (H) x 9176 (V)
Pixel Size 2.2um x 2.2um
Image Area
29.2mm (W) x 20.2mm (H)
Frame Rate (Global Shutter)
9.4fps, 10-bit output mode
Dark Current @ 60C
8.1e-/s @gain x8
Chroma
Mono or Color

System Noise

Read-out Noise (@9.5fps)
2.3 e¯

Data Acquisition Modes

Rolling shutter
For controlling electric charge accumulation periods

On-board Processor (MitySOM-A10S)

CPU Engine
Intel/Altera Arria 10 SoC – Dual core ARM and up to 480KLE FPGA fabric
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard F mount lens, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
-30°C to +80°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

Quantum Efficiency

120MXS Quantum Efficiency

Block Diagram

120MXS BlockDiagram

Interfaces

Mechanical

  • Measurements are in millimeters
Dimensions (with Compact Enclosure)
119.3mm x 119.3mm x 98.6mm  (4.7″ x 4.7″ x 3.9″)
Weight (with Compact Enclosure)
1105g (39oz)

Software

MityCAM image acquisition can be done with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists off-the-shelf configuration options for the 120MXS Evaluation Kit. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

 Kit Part Number 
Interface Option
Sensor Option
Buy
120MXS-UM-C-S USB 3 + Video output Mono Buy
120MXS-UC-C-S USB 3 + Video output Color Buy
120MXS-UI-C-S USB 3 + Video output RGB-NIR Buy

 

MityCAM-C50000

MityCAM-C50000 embedded vision solution for CMV50000

Contact Critical Link for product availability

Overview

The MityCAM-C50000 features a high-performance 47.5MP CMV50000 CMOS image sensor from ams / CMOSIS. The camera is available with an AIA USB 3.0 Vision Interface (U3V), and a video output interface.

Combined with Critical Link’s software tools designed for our Arria 10 based processor card, the MityCAM-C50000 makes sensor evaluation and product integration quick and easy. Critical Link also supports a board set version of the camera for customers designing their own mechanicals or managing other integrations; contact us for more details.

Applications

  • Machine Vision
  • Industrial Inspection
  • Flat Panel Display Inspection
  • Document Scanning
  • Aerial Mapping and Surveillance
  • Video/Broadcast

Documentation

Specifications

Sensor Specification

Sensor ams/CMOSIS CMV50000
Active Pixels 7920 (H) x 6004 (V)
Pixel Size 4.6um x 4.6um
Image Area
36.5mm (W) x 27.6mm (H)
Frame Rate (Global Shutter)
30fps, 12-bit output mode
Dark Current @ 25C
66.2e-/s
Dynamic Range
64dB-Normal
68dB-Binned
Extended Dynamic Range
Up to 90dB (with additional processing)
Chroma
Mono or Color

System Noise

Read-out Noise (@30fps)
8.8 e¯

Data Acquisition Modes

Global Shutter
For longer exposures or synchronizing with an external shutter

On-board Processor (MitySOM-A10S)

CPU Engine
Intel/Altera Arria 10 SoC – Dual core ARM and up to 480KLE FPGA fabric
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard F mount lens, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
0°C to +40°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

 

Quantum Efficiency

Quantum efficiency curve for AMS / CMOSIS CMV 50000 CMOS image sensor

 

 

 

 

 

 

Block Diagram

 

Interfaces

 

Mechanical

 

  • Measurements are in inches
Dimensions (with Compact Enclosure)
119.3mm x 119.3mm x 105.9mm  (4.7″ x 4.7″ x 4.17″)
Weight (with Compact Enclosure)
1248g (44oz)

 

Software

MityCAM image acquisition can be done with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists off-the-shelf configuration options for the MityCAM-C50000. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

 Camera Model  Enclosure Type
Interface Option
Color/
Mono
Buy
C50000-UM-C-S Body USB 3 + Video output Mono Buy
C50000-UC-C-S Body USB 3 + Video output Color Buy
C50000-UC-X-S Board Set USB 3 + Video output Color Buy

 

Accessory Kit

The table below outlines an accessory kit for the MityCAM-C50000. This kit is required when evaluating the sensor or doing development, and is compatible with the camera body models listed above. It is not required for cameras that are being integrated into a working design.

Part Number Kit Contents
80-001150
Nikon 50mm f/1.8 Lens
Tripod
I/O Cable
USB 3 Cable
Video Output Cable
Power Supply

Find your local sales contact.

MitySOM-5CSx with Dual Side Connectors

Altera Cyclone V SoC module for image processing

Overview

The MitySOM-5CSx with Dual Side Connectors (MitySOM-5CSx-DSC) is an Altera Cyclone V SoC module intended for use as an image processing board.  In addition to the processor, the module includes on-board power supplies, NOR FLASH, a DDR3 RAM memory subsystem, a real time clock (RTC), micro SD card, a USB 2.0 on the go (OTG) port, and a temperature sensor.  The MitySOM-5CSx-DSC provides a complete and flexible CPU infrastructure for highly integrated embedded systems.

The MitySOM-5CSx-DSC is available with a 110KLE Cyclone V SX which provides dual-core Cortex-A9 32-bit RISC processors with dual NEON SIMD coprocessors.   This MPU can run a rich set of real-time operating systems containing software applications programming interfaces (APIs) expected by modern system designers.  The ARM architecture supports several operating systems, including Linux, Micrium uC/OS, Android and QNX.

Applications

  • Embedded Imaging
  • Machine Vision
  • Medical Imaging
  • Test and Measurement
  • Industrial Automation and Control
  • Industrial Instrumentation
  • Medical Instrumentation
  • Closed Loop Motor Control

Documentation

Specifications

CPU

Cortex-A9 Applications Processor(s)  
Max # of Cores 2
Max CPU Speed 925MHz
L1 Program Cache 32KB
L1 Data Cache 32KB
L2 Cache 512KB
Internal RAM 64KB

CPU subsystem is a hard IP block referred to by Altera as the HPS, Hard Processor Subsystem

Memory

System Memory  
Max RAM* 2GB DDR3 with ECC
NOR Flash Up To 32MB

* RAM is accessible from the Cortex-A9 application processor(s) and the FPGA fabric

FPGA Fabric  
Max Logic Elements 110kLE
Global Clock 460MHz
Max M10K Memory 5.1Mb
Max MLAB Memory 621Kb
Max DSP Blocks 112

Block Diagram

 

 

 

 

 

 

 

 

Interfaces

2 Gigabit Ethernet 2 UARTs 2 SPI Master
4 High speed transceivers, 3.125Gbps 1 MMC/SD/SDIO 2 SPI Slave
High speed serializers 1 USB 2.0 OTG 4 I2C
PCIe Hard IP Block 2 CAN 3 HPS PLLs
Max 112 Direct FPGA I/Os

Mechanical

Dimensions Length Width
Inches 2.5 2.5
Millimeters 63.5 63.5

 

 

 

 

 

 

 

 

 

 

Development Kits

 

Development Tools and Software

Software Support

  • Embedded Linux
  • QNX
  • Android
  • Micrium uC/OS

Development Tools

Technical Support

Our customers benefit from engineering and applications support for the life of their product. This includes free, lifetime access to our technical support site, as well as access to application engineering resources and other services.

  • Visit our MitySOM-5CSx Altera Cyclone V Wiki to access:
    • Linux OS and board support package details, including source code
    • Product change notices
    • Base board design guide
    • Development kit base board design files
    • Software guide to getting started, tool chain, tips and how-to’s
    • Hardware power draw, pin outs, shock and vibration, CAD files, mechanical drawings and 3D models
    • Frequently asked questions
  • Visit our MitySOM-5CSx Altera Cyclone V Forum to access:
    • Software, Hardware, and FPGA forums
  • Altera 5CSx Information

Critical Link’s embedded design team also offers engineering services and other support options such as:

  • Schematic design review for customer designed carrier boards
  • Complete design review services
  • Software development services, including custom BSP development
  • Base board development services
  • Systems Engineering, Software, and Hardware Design to support your project anywhere in the product development lifecycle

Contact us for more information on these services.

Related Products

Purchase

Part Number 4A Bank FPGA
KLE
NOR HPS Boot FPGA
XCVR
HPS
RAM
Temp Buy
5CSX-H6-4XA-RI-DA 1.8V 110 32MB µSD Y 1GB -40C to 85C Buy
5CSX-H6-4XA-RC-DA 1.8V 110 32MB µSD Y 1GB 0C to 70C Buy
5CSX-H6-4XA-RI-DB 1.8V 110 32MB NOR Y 1GB -40C to 85C Buy
5CSX-H6-4XA-RI-DC 2.5V 110 32MB µSD Y 1GB -40C to 85C Buy
5CSX-H6-4XA-RC-DC 2.5V 110 32MB µSD Y 1GB 0C to 70C Buy

Does your application require an even more rugged Cyclone V SoC module?  Contact Critical Link to learn about available options.

Find your local sales contact.

MityCAM-C8000 Board Set

Product status: End of Life

 

Overview

The MityCAM-C8000 board set solution couples an 8MP CMV8000 image sensor from CMOSIS with the processing technology in Critical Link’s Altera Cyclone V SoC System on Module.

 

 

Applications

  • Machine Vision
  • Motion Control
  • Traffic Monitoring & Management
  • Security & Surveillance
  • Medical
  • Embedded Instrumentation

Documentation

Specifications

Sensor Specification

Sensor CMV8000
Type Front-illuminated
Active Pixels 3360 (H) x 2496 (V)
Pixel Size 5.5um x 5.5um
Image Area
18.48mm (W) x 13.73mm (H)
Frame Rate (Global Shutter)
95fps, 10-bit output mode
Dark Current @ 25C
41.2 e-/s
Dynamic Range
60dB
Extended Dynamic Range
Up to 90dB (with additional processing)
Chroma
Mono or Color

System Noise

Read-out Noise (@104fps)
8.6 e¯

Data Acquisition Modes

Global Shutter
For longer exposures or synchronizing with an external shutter

On-board Processor (MitySOM-5CSX)

CPU Engine
Altera Cyclone SoC – Dual core ARM Cortex-A9 and FPGA
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard C or F mount lens, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
0°C to +50°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

Quantum Efficiency

CMV8000 QE Curve

 

 

 

 

 

 

 

Block Diagram

MityCAM-C8000_block-diagram

 

 

 

 

Interfaces

 

Mechanical

Dimensions (with Compact Enclosure)
76.2mm x 76.2mm x 70.55mm  (3.0″ x 3.0″ x 2.78″)
Weight (with Compact Enclosure)
538g (19oz)

Software

MityCAM image acquisition can be done through either a CameraLink panel application or with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists configuration options for MityCAM-C8000 board set solutions. Please note, customers doing their own development will initially require a full camera — click here to see options. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

 Camera Model  Enclosure Type
High Speed
Interface Option
Color/
Mono
Buy
C8000-CM-B-S Board Set Only Dual Camera Link Mono Buy
C8000-GM-B-S Board Set Only Gigabit Ethernet Mono Buy
C8000-CC-B-S Board Set Only Dual Camera Link Color Buy

Find your local sales contact.

MityCAM-B1910F Board Set

Contact Critical Link for product availability

Overview

The MityCAM-B1910F Board Set Solution couples a 2.1MP high-performance, low noise sCMOS imaging sensor from Fairchild Imaging (a division of BAE Systems) with the processing technology in Critical Link’s Altera Cyclone V SoC System on Module.

 

Applications

  • Machine Vision
  • Low-light Imaging
  • Embedded Instrumentation
  • Scientific Imaging
  • Surveillance Imaging
  • Unmanned & Autonomous Systems
  • Metrology Imaging

Documentation

Specifications

Sensor Specification

Sensor CIS-1910F
Type Front-illuminated
Active Pixels 1920 (H) x 1080 (V)
Pixel Size 6.5um x 6.5um
Image Area (W x H) 12.5mm x 7.1mm
Frame Rate
   Rolling Shutter
   Global Shutter
 
75fps*
37fps*
Dark Current e-/pixel/sec @ 20C
<35 e-
Peak Quantum Efficiency
>55%
Dynamic Range
>88dB
ADC – Dual 11-bit ADC
Yes

*Data rates up to 100/50fps (rolling/global shutter mode) are possible but not yet qualified.

System Noise

Noise (typ)
< 1.2 e¯

Data Acquisition Modes

Global Shutter
For longer exposures or synchronizing with an external shutter
Rolling Shutter
For normal high-speed operation

On-board Processor

CPU Engine
Altera Cyclone SoC – Dual core ARM Cortex-A9 and user-programmable FPGA
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard C mount lens, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
0°C to +50°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

Quantum Efficiency

MityCAM-B1910F-Spectral-Response

 

 

 

 

 

Block Diagram

MityCAM-B1910F_block-diagram

 

 

 

Interfaces

 

Mechanical

Dimensions (with Enclosure)
76.2mm x 76.2mm x 66.32mm  (3.0″ x 3.0″ x 2.61″)
Weight (Camera configuration with Camera Link I/O)
589g (20.75oz)

Software

MityCAM image acquisition can be done through either a CameraLink panel application or with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists configuration options for the MityCAM-B1910F board set solutions. Please note, customers doing their own development will initially require a full camera — click here to see options. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

Model Number
Sensor
Package
Sensor
Window
Chroma
High Speed
Interface
Body
Buy
B1910FTS-CM-B-S Scientific Sealed Mono  Dual Camera Link Board Set Buy
B1910FTS-GM-B-S Scientific Sealed Mono  Gigabit Ethernet Board Set Buy
B1910FTS-CC-B-S Scientific Sealed Color  Dual Camera Link Board Set Buy
B1910FTT-CM-B-S Scientific Temporary Mono Dual Camera Link Board Set Buy
B1910FTT-GM-B-S Scientific Temporary Mono Gigabit Ethernet Board Set Buy

Find your local sales contact.

MityCAM-B2521F Board Set

Contact Critical Link for product availability

Overview

The MityCAM-B2521F Board Set Solution couples a 5.5MP high-performance, low-noise sCMOS imaging sensor from Fairchild Imaging (a division of BAE Systems) with the processing technology in Critical Link’s Altera Cyclone V SoC System on Module.

 

Applications

  • Machine Vision
  • Low-light Imaging
  • Embedded Instrumentation
  • Scientific Imaging
  • Surveillance Imaging
  • Unmanned & Autonomous Systems
  • Metrology Imaging

Documentation

Specifications

Sensor Specification

Sensor CIS-2521F
Type Front-illuminated
Active Pixels 2560 (H) x 2160 (V)
Pixel Size 6.5um x 6.5um
Image Area (W x H) 16.8mm x 14.2mm
Frame Rate
   Rolling Shutter
   Global Shutter
 
70fps*
35fps*
Dark Current e-/pixel/sec @ 20C
<35 e-
Peak Quantum Efficiency
>55%
Dynamic Range
>83.5dB
ADC – Dual 11-bit ADC
Yes

*Data rates up to 100/50fps (rolling/global shutter mode) are possible but not yet qualified.

System Noise

Noise (typ)
< 2 e¯

Data Acquisition Modes

Global Shutter
For longer exposures or synchronizing with an external shutter
Rolling Shutter
For normal high-speed operation

On-board Processor (MitySOM-5CSX)

CPU Engine
Altera Cyclone SoC – Dual core ARM Cortex-A9 and FPGA
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard C mount or F mount, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
0°C to +50°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

Quantum Efficiency

MityCAM-B2521F-Spectral-Response

 

 

 

 

 

 

 

Block Diagram

MityCAM-B2521FTS_block-diagram

 

 

 

Interfaces

Mechanical

Dimensions (with Compact Enclosure)
76.2mm x 86.56mm x 72.28mm  (3.0″ x 3.41″ x 2.85″)
Weight (with Compact Enclosure)
524g (18.5oz)

Software

MityCAM image acquisition can be done through either a CameraLink panel application or with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists configuration options for the MityCAM-B2521F board set solutions. Please note, customers doing their own development will initially require a full camera — click here to see options. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

 Model Number
Sensor
Package
Sensor
Window
Chroma
High Speed
Interface
Body
Buy
B2521FTS-CM-B-S Scientific Sealed Mono  Dual Camera Link Board Set Buy
B2521FTS-GM-B-S Scientific Sealed Mono Gigabit Ethernet Board Set Buy
B2521FTS-CC-B-S Scientific Sealed Color  Dual Camera Link Board Set Buy
B2521FTT-CM-B-S Scientific Temporary Mono Dual Camera Link Board Set Buy
B2521FTT-GM-B-S Scientific Temporary Mono Gigabit Ethernet Board Set Buy

Find your local sales contact.

MityCAM-C8000

Product status: End of Life

 

Overview

The MityCAM-C8000 couples an 8MP CMV8000 image sensor from CMOSIS with the processing technology in Critical Link’s Altera Cyclone V SoC System on Module.

 

 

Applications

  • Machine Vision
  • Motion Control
  • Traffic Monitoring & Management
  • Security & Surveillance
  • Medical
  • Embedded Instrumentation

Documentation

Specifications

Sensor Specification

Sensor CMV8000
Type Front-illuminated
Active Pixels 3360 (H) x 2496 (V)
Pixel Size 5.5um x 5.5um
Image Area
18.48mm (W) x 13.73mm (H)
Frame Rate (Global Shutter)
95fps, 10-bit output mode
Dark Current @ 25C
41.2 e-/s
Dynamic Range
60dB
Extended Dynamic Range
Up to 90dB (with additional processing)
Chroma
Mono or Color

System Noise

Read-out Noise (@104fps)
8.6 e¯

Data Acquisition Modes

Global Shutter
For longer exposures or synchronizing with an external shutter

On-board Processor (MitySOM-5CSX)

CPU Engine
Altera Cyclone SoC – Dual core ARM Cortex-A9 and FPGA
Full Featured SDK
Supports rapid application development

Mount

  • Full cameras feature a standard C or F mount lens, while the board set version allows quick and easy custom integration into your product. Please contact Critical Link for more information.

Environment

Temperature
0°C to +50°C
Humidity
<80% non-condensing

Electrical

Voltage
12 VDC

 

Quantum Efficiency

CMV8000 QE Curve

 

 

 

 

 

 

 

Block Diagram

MityCAM-C8000_block-diagram

 

 

 

 

Interfaces

 

Mechanical

Dimensions (with Compact Enclosure)
76.2mm x 76.2mm x 70.55mm  (3.0″ x 3.0″ x 2.78″)
Weight (with Compact Enclosure)
538g (19oz)

 

Software

MityCAM image acquisition can be done through either a CameraLink panel application or with MityViewer, Critical Link’s software solution for optimal throughput and complete functionality.

We recommend visiting the MityCAM wiki page on our engineering support site and registering for an account in advance of receiving your MityCAM. Once your registration is confirmed, you can download the latest version of our MityViewer software from the wiki page, which will be required to start capturing images.

Related Products

Purchase

The following table lists off-the-shelf configuration options for the MityCAM-C8000. For shipping status, availability, and lead time of these or other configurations, please contact Critical Link.

 Camera Model  Enclosure Type
High Speed
Interface Option
Color/
Mono
Buy
C8000-GC-C-S Compact Enclosure GigE Vision Color Buy
C8000-GM-C-S Compact Enclosure GigE Vision Mono Buy
C8000-CC-C-S Compact Enclosure CameraLink Color Buy

 

Accessory Kit

The table below outlines an accessory kit for the MityCAM-C8000. This kit is required when evaluating the sensor or doing development, and is compatible with the camera body models listed above. It is not required for cameras that are being integrated into a working design.

Part Number Kit Contents
80-000784
Nikon AF NIKKOR 50mm f/1.8d Lens
Lens Mount Adapter
Tripod
I/O Cable
USB Cable
Power Supply
Ethernet Cable

Find your local sales contact.