| Sensor |
| Type |
Back-illuminated |
| Pixel Size |
24 um x 24 um |
| Image Area |
12.288 (H) x 1.392 (V) to 24.576 (H) x 6.0 (V) mm (Check Sensor Selection Chart) |
| Pixel Array |
512 x 58 to 1024 x 250 pixels (Check Sensor Selection Chart) |
| Well Capacity |
320 ke¯ (typical - vertical) |
| Well Capacity |
1000 ke¯ (typical - horizontal) |
| Dark Current |
10 e¯/pixel/sec (typ. @ 0° C) |
| System Noise |
| Noise (typ) |
12 e¯ RMS @ 500 KHz |
| Data Acquisition & Binning Modes |
| Area Read |
Full image and sub-area (any rectangular region of the CCD) |
| Full Binning |
Standard CCD binning (all CCD rows summed in read-out register) |
| Partial Binning |
Some rows summed in CCD and partial results summed in MityDSP |
| Area Mask Binning |
Vertical and horizontal binning in MityDSP |
| Multiple Binning Patterns |
Multiple Binning patterns stored in memory and swapped in as directed on a cycle basis |
| On-board Processor (MityDSP) |
| CPU Engine |
Floating-point DSP, FPGA, FLASH, SDRAM (up to 32 M byte) |
| Full featured SDK |
Supports rapid application development |
| Applications |
Peak finding, signature analysis, general purpose computing, etc. |
| Cooling |
| Type |
Thermo-electric to -15 C (from 20 C ambient) +/- .1° C |
| Communications |
| USB |
Supports USB 2.0 |
| Ethernet |
Supports full TCP / UDP stack over 10 / 100 Base T |
| Digital I/O |
Supports external triggering and control of outboard devices |
| Mount |
| Mounts |
Several standard mounts available. Please contact factory |
| Environment |
| Temperature |
-20° C to +30° C |
| Humidity |
10% to 90% non-condensing |
| Electrical |
| Voltage |
110V / 220V or 9-24 VDC |
| Mechanical |
| Dimensions |
98 mm x 100 mm x 90 mm (3.86" x 3.94" x 3.54") |
| Weight |
750 g (26 oz.) |
